Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Pine A64 DIY Miner
#11
(10-16-2018, 07:14 PM)dobby Wrote: Hi,

The build of Christian ott does not contain the extra pine 64 monitor, he probably sacrificed his seventh module for this. It's probably possible to insert the monitor node sd card into the first pine and leave the last one out? This would be a more compact build in a atx case and would not include an extra external pine box. Would you recommend such a build or are there downsides?

Christian's build has 7 nodes. He could have had 8 if he connected a Pine A64 Mini-PC board to his monitor node

My suggestion is to configure an 8 board miner. The more nodes you have, the more skycoin you earn

If you go the 8 node route, the clusterboard can power the 8th (external Pine A64 Board node) using one of its USB ports
[-] The following 1 user says Thank You to skyguy for this post:
  • I Am You
Reply
#12
Hello

Does a Pine A64 DIY Miner need a separate Router (other than from ISP provided).
Our 7 nodes pop-up frequently on the ISP Router's Monitor Screen, yet are never stable visible. Eventhough they can be succesfully pinged on cmd (Windows).

Our issue is also that we never get to the Skywire Monitor by using 127.0.0.1:8000. What ever browser, the message is always something like: .... too many times redirected (translated from German to English).
Reply
#13
(11-05-2018, 12:58 PM)renereingard Wrote: Hello

Does a Pine A64 DIY Miner need a separate Router (other than from ISP provided).
Our 7 nodes pop-up frequently on the ISP Router's Monitor Screen, yet are never stable visible. Eventhough they can be succesfully pinged on cmd (Windows).

Our issue is also that we never get to the Skywire Monitor by using 127.0.0.1:8000. What ever browser, the message is always something like: .... too many times redirected (translated from German to English).

External router only needed if your Miner's IP range is different to your home network, or you want to separate the two

**Better to separate the two and use a VPN if you plan on being an exit node
Reply
#14
Hi Guys, for this build. Do we need to buy 8 sd card? Or just one? I know the board comes with flash, is that where we should install the os? Thanks!
Reply
#15
(11-14-2018, 05:15 PM)Hvalentino Wrote: Hi Guys, for this build. Do we need to buy 8 sd  card? Or just one? I know the board comes with flash, is that where we should install the os? Thanks!

It will need a Micro SD card per node. So yeah 8 of them
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)