Skycoin Forum
Skywire Packages for Debian / Armbian & Archlinux - Printable Version

+- Skycoin Forum (https://skywug.net/forum)
+-- Forum: General Discussions (https://skywug.net/forum/Forum-General-Discussions)
+--- Forum: Skycoin Project (https://skywug.net/forum/Forum-Skycoin-Project)
+---- Forum: Skywire (https://skywug.net/forum/Forum-Skywire)
+---- Thread: Skywire Packages for Debian / Armbian & Archlinux (/Thread-Skywire-Packages-for-Debian-Armbian-Archlinux)



Skywire Packages for Debian / Armbian & Archlinux - moe_narrow - 06-05-2019

It's now easier than ever to install your favorite skycoin software on debian / armbian / raspbian & archlinux.

Debian / Armbian / Raspbian packages may be found here:
https://github.com/Skyfleet/skydebs/releases

This package can be installed without disrupting any previous skywire installation that might exist on your board.

These packages were created on orange pi prime and have also been tested on RPi.

Here is an example of installing the latest skywire testnet package; using wget to fetch the package (wget is not installed by default)

sudo apt-get install wget
wget https://github.com/Skyfleet/skydebs/releases/download/skydebs/skywire-20190505-1-arm64.deb
sudo dpkg -i --force-overwrite skywire-20190505-1-arm64.deb


To run skywire manager & node:
skywire

Run skywire node with default manager IP: 192.168.0.2
skywire-node-miner

If you wish to use a different ip address for the manager; simply edit the script at
/usr/bin/skywire-node-miner

The system.d service files work and their names have not been changed.


These packages are updated regularly.


If you are using archlinux or archlinuxarm; you can cleanly build and install any package with yay -S <package_name>

Refer to the AUR or skyfleet github for a list of available packages.


questions or feedback are welcome at:
t.me/SkyPackages